Plumbing

Why Septic Tank Cleaning Is Necessary

Septic tank cleaning is a necessary service that helps prevent sewage back-ups, which can be dangerous for your family. It also keeps potentially hazardous materials from building up inside the drain field, which could pollute local water sources.

Products are available to extend the time between septic tank cleanings, but it’s important to research before selecting one. Visit Website to learn more.

septic tank cleaning

A septic system works by using an inlet baffle, a distribution box, and perforated pipes that are buried in a drain field (sometimes called a leach field). When you flush your toilet or run water, bacteria in the septic tank help digest organic material. This liquid then discharges into the buried pipes. It eventually reaches groundwater.

A well-functioning septic system will have a scum layer on the top, which contains fats, oils, and other fatty substances, and a sludge layer on the bottom, which is comprised of solid waste. Microorganisms break down these materials and other floating matter, causing them to sink into the sludge layer and then the wastewater. The wastewater then flows into the drain field, where it is absorbed into the soil.

If your inlet baffle to the septic tank is blocked with solids, it can cause the septic system to overflow and clog toilets and drains. It’s important to only use septic-safe toilet paper and to have the septic tank inspected annually to prevent this problem.

During a septic tank inspection, the inspector will check the sludge level with a sludge judge or other device. The sludge should not occupy more than one-third of the tank’s volume or rise above the level of the inlet baffles. The inspector will also check for a broken baffle or any other structural problems in the tank.

Some people try to maintain their septic systems by adding chemical and biological additives. These products claim to speed up the breakdown of organic material and add more bacteria. However, these additives can upset the delicate bacterial balance in your septic tank and make it more likely that solids will clog system components.

If you see water on your yard, in the toilets, or in the bathtub, it’s a sign that your septic system is overloaded and needs to be pumped. A professional septic tank inspector can tell you how often your septic system should be inspected and whether it needs to be pumped. He or she may test the septic system by flushing toilets and turning on faucets to ensure that it’s functioning correctly.

If your property uses a septic tank to dispose of wastewater, it’s crucial to have the system regularly inspected and cleaned. This will prevent the buildup of sludge that can clog the system, cause backups, and release untreated waste into the environment. Regular inspection and cleaning will also prolong the life of your septic tank and ensure that it treats wastewater properly.

The septic tank itself is usually located underground, and it can be difficult to inspect from the outside. However, you can dig up the tank to expose its access port for an inside look at its contents. Once the lid is open, a professional inspector will examine the layers of solid and liquid waste. These layers are important to the septic tank’s operation, and they indicate how full or empty it is.

There are two main types of waste that enter your septic tank: sludge and scum. Sludge is the bottom layer of the septic tank, and it’s comprised of waste that has been broken down by bacteria. Scum is the top layer of the septic tank, and this is composed of floating waste.

These two layers are separated by the septic tank’s dividing wall. In most septic tanks, it’s essential to have both compartments pumped out during each cleaning. This ensures that all of the solids are removed and prevents them from becoming a problem in the future.

In addition to regularly cleaning and pumping your septic tank, you should avoid putting any hazardous chemicals down the drains. This includes things like foaming drain cleaners, toilet bowl cleaners, and other chemical products that can kill the beneficial microorganisms in your septic tank.

If you use a chemical drain cleaner, it’s best to only use it on an as-needed basis. Liquid drain cleaners are fine as long as they’re water-based, and you can tell by looking at the ingredients whether or not they contain harmful chemicals that could damage the bacteria in your septic tank.

A septic tank is a large container that’s buried underground to treat wastewater from your home. It’s important to have a regular cleaning service to keep sludge and scum layers from building up inside. This prevents the septic system from functioning properly.

A professional septic cleaner can use a high-pressure hose to water jet the septic tank. This involves bringing a special truck equipped with the right equipment to your home. A large hose is inserted into the manhole into the septic tank and then the tank is vacuumed clean of sludge and scum. This process is quicker and easier for your septic system than using a drain snake or harsh chemicals.

Water jetting uses a high-powered water hose with a 360-degree nozzle to blast away grime and waste residue in your septic pipes. This can eliminate clogs that are resistant to augers and even some chemical drain cleaners. It’s healthier for your septic system, too, as it doesn’t use harsh chemicals that degrade the lining of your septic lines.

Your septic system is made up of a series of pipes that run from the house to your septic tank. These pipes can get clogged with debris and cause a lot of problems. The most common sign of a problem is if there are odors coming from your drains or if the toilets are flushing slowly. You should also check the yard for puddles and wet spots.

If you do see these signs, then it’s time to schedule a septic tank cleaning service. A septic tank that isn’t cleaned on a regular basis will eventually overflow, leading to sewage backups and a stinky living space. A septic tank cleaning service can restore the septic tank’s proper function and help you save money by preventing expensive repairs down the road.

A professional septic tank company can also water jet the septic system’s drain field line. This is a great way to remove any blockages that can’t be removed by augers or drain snakes. The high-pressure water will eliminate grime and sludge and can cut through tree roots that have grown into the septic system’s lines.

Septic tanks contain helpful bacteria that break down solid waste. But over time, these solids build up in the tank. The more solid waste in the tank, the more it can clog the absorption field and prevent wastewater from passing through. Regular septic system cleaning helps prevent this. It also extends the life of the septic system and prevents health and environmental hazards.

As the septic system operates, solid materials settle at the bottom of the septic tank and form a sludge layer. Grease and other lightweight materials float to the top of the septic tank and become scum. Cleaning and pumping the septic tank remove these layers of solid waste from the septic system, keeping it safe and preventing overflows and other problems.

Pumping the septic tank involves using a large truck and vacuum equipment. The septic service professional inserts a hose into the manhole to vacuum out the contents of the septic tank. Then, the tank is removed and taken away for disposal. The septic service professional should note the tank condition and any repairs in his or her report.

The frequency with which you need to have your septic system pumped depends on the size of the septic tank and the number of people living in your home. As a general rule, the septic tank should be pumped every three to five years, or more frequently if you have more people than average or your septic tank is larger than normal.

Regular septic system cleaning can help prevent clogs, which in turn can protect the drain field and keep wastewater from backflowing into the house. It can also save you money on costly septic tank repairs.

If you want to extend the life of your septic system, have it inspected and cleaned regularly by a certified septic service professional. Follow a few simple tips to prevent septic tank clogs and overflows, such as never flushing cat litter, coffee grounds, grease, feminine hygiene products, diapers, condoms, tampons, or cigarette butts. Also, keep trees and shrubs away from the septic tank and absorption field.

Electrician

Electricians Are in Demand

electrician

Nearly every home and business uses electricity. Hence, electricians are always in demand. Plus, alternative energy generation like solar and wind may become more popular, requiring more electricians for installation services and linking these systems to power grids.

Electricians Fort Worth install, maintain, and repair electrical wiring, equipment, and fixtures. They also inspect and test these systems to ensure compliance with safety codes. They must communicate well with other trade professionals and design engineers, as they may need to collaborate on complicated projects. They often work outdoors and indoors and may need to climb ladders or scaffolding to reach difficult-to-reach spaces.

After completing an apprenticeship, electricians may become journeyman or master electricians. Master electricians typically earn more money and have additional responsibilities like supervising apprentices and new hires. Both journeymen and master electricians must regularly update their skills through continuing education programs.

In addition to testing and maintaining electrical equipment, electricians must also troubleshoot problems with these systems. They use a variety of hand and power tools to fix these issues. They must have good color vision to identify wires and be able to think on their feet when solving technical problems.

Many electricians prefer this career because it offers them a varied and interesting job. They can work on various projects, from installing lighting and appliances to rewiring entire buildings or campuses. They can even work on projects in the mining or renewable energy industries.

A career as an electrician can also be a great choice for people who hate sitting at a desk all day. Electricians are on their feet all day and frequently lift objects that weigh up to 50 pounds. They also need to be able to stand for long periods and work at high elevations.

Another perk of this career is that it can be a great source of extra income for people who enjoy freelancing. They can sell their services to neighbors or friends who need help fixing a lamp or upgrading a water heater. This job requires strong communication skills, but making extra cash on the side can be very rewarding.

An individual interested in a career as an electrician must complete a vocational or trade school program and earn a certificate or diploma. The school program may also include a work internship that places the student with a licensed electrician or electrical contracting firm to obtain the experience necessary for licensure. This career path is a good option for individuals who want to enter the profession without incurring large amounts of debt typically associated with completing a bachelor’s degree program at a university.

On-the-job training allows students to learn practical skills and understand the profession’s basics, including safety requirements and electrical standards. The work is fast-paced and requires keen eyesight, hand-eye coordination, and the ability to use math and scientific principles to solve problems.

Some apprenticeship programs are available through local unions, such as the International Brotherhood of Electrical Workers (IBEW), and offer a way for aspiring electricians to obtain hands-on work experience. However, many apprenticeship opportunities are limited and highly competitive. Individuals who cannot secure an apprenticeship should consider a vocational or trade school program that can provide a jump start on the apprenticeship process or even allow apprenticeship credits to count toward an associate degree program.

Electricians must often obtain a bond and carry liability insurance to do their work. This is because they are responsible for following all building codes and ensuring that the installation or repair of items is done correctly. This is especially important in commercial or high-rise buildings where errors can be catastrophic for the occupants.

A career as an electrician is challenging because of the risks involved with electricity, but it can be very rewarding for individuals who enjoy a physically demanding and exciting job. The pay is good, and various specialties can be chosen, including working with power generation or transmission, green energy/solar, automation, manufacturing, mining, or energy supply industries. The field is always changing and expanding, and it’s a great choice for those interested in a long-term career.

There are several ways to prepare for a career as an electrician. Some attend a technical or trade school offering a certificate or associate degree in electrical technology or engineering. In contrast, others pursue an apprenticeship with a licensed master electrician. Apprenticeship programs typically require between 4,000 and 10,000 hours of work, which equals 2 to 5 years of paid on-the-job training. Regardless of how you complete your education and training, you must pass an exam to obtain a state license to practice as an electrician.

Exam details vary from state to state, but most require intensive study of the National Electrical Code, which is the set of rules and regulations that governs how electricians install, repair, and maintain electric systems. You may also be required to pass a practical exam, which tests your ability to handle tools and test circuits. Many electricians also earn certification in specialized fields such as hazardous materials handling, high-voltage cable splicing, and instrumentation. These additional qualifications can improve your job prospects and open up new opportunities to advance your career.

Even if you want to avoid specializing, earning specialty credentials can increase your value as an employee and help you compete with less-qualified candidates for jobs. For example, becoming certified as a solar or green electrician demonstrates that you have a broad knowledge of the field and can meet customers’ needs seeking more environmentally friendly solutions.

In addition to your professional qualifications, you’ll need the right insurance coverage to protect yourself from liability. In most cases, if you work as an employee for a contracting company, your employer will carry general and professional liability insurance and workers’ compensation. You may need liability insurance if you are self-employed or own a contracting business.

As an independent contractor, you’ll need to have general and professional liability, as well as personal property protection insurance. You may also need to obtain a construction liability policy to cover damage to buildings or other structures that you are working on.

The recession’s end and a resurgence in construction have made the job outlook for electricians very good. The demand for this skilled labor is expected to grow at least nine percent from 2016 to 2026, which is better than the average for all occupations. The increased number of devices, buildings, and vehicles that rely on electricity will require additional electricians to install and maintain these systems.

The emergence of alternative energy systems — particularly solar and wind technology — also creates excellent opportunities for electricians. They will be required to install these new technologies and link them to the power grids, although government policy will determine how large a share of this new employment growth will occur.

Licensed electricians are highly sought after, and their salaries reflect this fact. Even a starting apprentice can earn more than many debt-burdened college grads, with the top earners bringing in well over $50,000 annually. In addition, they can enjoy benefits such as health insurance and a robust retirement plan.

As the demand for electricians increases, some states have more jobs available than others. The states have the most openings for this occupation, but other areas are also growing quickly. For example, the need for electricians to work on the electrical infrastructure of highways and roadways creates great opportunities.

Some electricians specialize in certain areas of the industry, such as commercial and industrial systems or residential services. These workers can often advance to journeyman and master electrician positions, increasing their salary and benefit options.

The pay for electricians varies by state, but it generally is higher in the metro areas of large cities. However, the cost of living and the costs associated with obtaining a license to practice in this field can make a big difference in what an electrician will earn.

To attract qualified electricians, businesses can help with scholarships and apprenticeships. They can also team up with trade or vocational schools to provide educational and training opportunities for students.


Generators

What Is a Power Generator?

Guys Generators are machines that convert mechanical energy into electrical power. It operates based on the principle of electromagnetic induction, which scientist Michael Faraday discovered.

Generators are available in different power capacities, allowing end-users to match their specific needs. They may be powered by natural gas, petrol, or diesel.

generator

Energy efficiency is a vital aspect of power generators. As people become more dependent on electricity, it becomes important that the generators provide the necessary amount of kilowatts to ensure that essential systems remain operational. This is why it’s critical that those shopping for a generator purchase one large enough to meet their specific energy needs.

In most cases, generators convert mechanical energy into three-phase electrical energy using the principle of electromagnetic induction discovered by Michael Faraday. In other words, the relative motion of an iron core and a conducting wire within a magnetic field creates electric currents that flow through the conductor. Depending on the energy source that powers the generator, the types of electricity generated can vary widely. Fossil fuels like coal and oil are the most common, but cleaner sources like nuclear and renewable energy power some generators.

Many modern power generators are designed to work in conjunction with an alternator. The alternator takes in the mechanical energy of a running engine and produces AC voltage that is then fed into a series of secondary windings known as exciter windings. The excitation of these windings causes them to generate small amounts of DC provided into the primary stator windings through units known as rotating rectifiers. This allows the generator to produce a larger amount of AC power.

A generator’s output voltage dips when it begins to consume power, and this triggers the reversing of the alternator’s field coils and the production of more DC in the armature winding. This continues until the generator achieves a steady power output state and reaches its full operating capacity.

In addition to reducing energy demand, efficiency programs can increase energy access by freeing up energy for utilities to expand their distribution networks for off-grid communities. Efficiency programs can also promote time-of-use pricing, encouraging consumers to use energy during off-peak hours.

However, some key market barriers inhibit energy efficiency’s mainstream adoption. Efficiency investments tend to have higher upfront costs than other energy supply options, and credit constraints limit the availability of these efficiency measures for some consumers. These challenges can be addressed through policy intervention, which reshapes the market and puts efficiency on a more level playing field.

A power generator is an industrial machine that converts mechanical energy into three-phase electrical energy using a rotating magnetic field and conductor. Most power plants use fossil fuels such as coal, oil, and natural gas to generate electricity. Other sources of energy include wind, wave, solar, and hydroelectricity. The amount of carbon dioxide and sulfur oxides released depends on the type of energy used. In addition to these emissions, generating electricity removes other pollutants, including mercury, particulates, and hydrocarbons. These pollutants can have adverse effects on human and animal health.

The main environmental issue associated with electricity generation is the production of carbon dioxide and sulfur dioxide. For example, burning coal with 2.5 percent sulfur produces about nine tons of CO2 and 120 kilograms of SO2. These gases are released into the atmosphere and can have serious environmental impacts.

Another environmental issue associated with generators is noise pollution. In some cases, generators produce extremely loud noises that can cause hearing loss and other health issues. These noises are also dangerous for animals and plants, especially if they are exposed to them continuously.

Some methods for reducing the impact of generators on the environment include using hydrogen as an efficient coolant and installing exhaust systems that eliminate hazardous fumes. Hydrogen is an excellent coolant because it can absorb the heat given off by a generator without releasing any water vapor or other chemicals into the air. Other methods of cooling a generator include standard radiators and fans.

Power stations that utilize clean fuels and technology can reduce their environmental impact significantly. These power stations can use a variety of fuels to create electricity, including nuclear and renewable sources such as wind, sun, and biomass. In addition, they can also use techniques such as combined heat and power (CHP), which provides both electricity and heat simultaneously from the same source of energy.

It has several large diesel-powered generators that provide electricity when its main grid is cut off for long periods. These generators usually operate for two to four hours on a regular working day and emit high levels of PM1. This is one of the most toxic particles that can damage human cells and disrupt the respiratory system.

Power generators are flammable and emit deadly carbon monoxide, so they should be kept at least 20 feet away from buildings, doors, vents, and crawl spaces while running. It’s also recommended to install battery-operated carbon monoxide detectors inside your home to alert you of any dangerous levels of CO in the air. Portable generators should never be used indoors or in partly enclosed areas such as garages. Carbon monoxide poisoning from generator exhaust can kill you within a matter of minutes.

If you connect your generator directly to your house or building without disconnecting from the power grid, it’s known as backfeeding and is extremely dangerous. It puts utility workers and neighbors connected to the same power line at risk of electrocution and can destroy your appliances or start an electrical fire. Backfeeding also bypasses some built-in household circuit protection devices and creates a potential shock hazard for anyone touching the generator’s electrical components.

A generator should only be used in dry conditions protected from rain and water runoff. A canopy-like structure is ideal, but you can operate it on a dry surface under an open umbrella. Make sure the generator is fully cooled before moving it and refueling it. Fuel spilled on hot engine parts could spark a fire.

Keep kids and pets away from the generator while it’s operating. It’s important to ensure the unit is at least five feet away from doors, windows, and vents. This will prevent them from being poisoned by deadly exhaust fumes. It’s also recommended to use a generator cover to protect it from the elements and to store it in a safe location.

Keep distilled water on hand if your generator overheats. Regular generator maintenance is necessary, including checking fluid levels and cleaning the unit. You should also test the transfer switch and load bank regularly to ensure they’re in working order. It’s a good idea to record all hour-meter readings and other data to detect potential problems before they become serious.

Power generators are essential for several reasons. They provide a steady energy source for our homes and businesses to function properly. This is particularly important in hospitals, airports, and military offices where downtime can have significant consequences. Power generators are also used in homes to ensure that important medical devices work and prevent people from suffering from severe health problems if they lose their primary power sources.

Power generation consists of converting any energy into electrical energy. It is measured in units of electricity, usually kilowatts (kW) or kilovolt-amperes (kWe). The mechanical power that generates the electrical power comes from the generator engine. This engine can be powered by fossil fuels like gasoline, diesel, natural gas, or steam; alternative energy sources such as solar, wind, and hydro; or even nuclear energy.

The reliability of a generator depends on a few factors, including maintenance and the quality of its fuel. It is also affected by weather conditions, leading to longer and more frequent outages. A 2022 Associated Press study found that the number of power outages has doubled due to climate change-induced wildfires and hurricanes.

While there are ways to mitigate a power outage, such as using flashlights or taking refuge in a basement or attic, having a whole-house generator can ensure families stay comfortable. This can ease stress during a crisis, protect children from wandering in the dark, and deter burglars looking for easy targets.

The engine of a generator must be well-lubricated to prevent damage from friction and overheating. IoT sensors can monitor the oil levels in a generator and alert the maintenance team when it’s time to add more lubricant. This helps avoid situations where the generator fails to start because of a low battery or overheating.

The generator can also be monitored for any signs of water infiltration, which can cause rust and other damage to the engine. IoT sensors can detect moisture in the fuel and warn the team before this issue causes a power outage.

Electrical Services
Uncategorized

Full Electrical Services

Electrical systems are complex and require regular maintenance to function properly. A failure of just one component can have catastrophic consequences for the entire system.

A home’s electrical service, also called an electrical panel, is the central hub where power from the utility comes in and distributes to outlets and appliances throughout a house. It may be overhead or underground.

Residential

Residential work includes new construction, rewiring of existing homes and electrical home inspections. It also includes electrical service upgrades, knob and tube rewires, electric car charging stations and lighting systems. The company can help homeowners make their homes safer, more comfortable and user-friendly.

Residential electrical services begin with the incoming power lines, also known as the electric service drop. These are bundles of wire that extend from the meter to your house. The electric service drops are owned and maintained by the local utility company that manages electricity in your area. This equipment, up to and including the meter, is typically located on or near the street curb. From there, the cables extend to your home’s main electrical panelboard, which is usually referred to as the breaker box. This is where the 240-volt power is distributed to your home’s electrical system.

The breaker box typically has two large wires connected to screw terminals that are referred to as lugs. The lugs on these wires are hot and carry the 240-volt power that is then distributed throughout your home. Once the lugs are attached, it’s important to ensure that the breaker is set at the correct size so that your home can safely receive the amount of electricity you need.

When you’re looking for a residential electrician, it’s important to ask about their qualifications and experience. Look for companies with positive customer feedback and high online ratings. In addition, the company should offer a one-year parts and labor warranty.

A residential electrical service can vary in capacity depending on several factors, including the size of your major disconnect (mounted prior to the service entrance conductors entering your home). A standard residential circuit breaker is usually rated for up to 200 amps. However, it’s crucial to consult with a licensed professional to determine the exact size of your service and the best equipment for your home. This will ensure that you have the right amount of electrical capacity for your current and future needs. Additionally, it will prevent over-sizing which can cause significant damage and increase the likelihood of a fire or other unsafe conditions.

Commercial

Electrical contractors offer commercial customers a full range of services to keep their businesses operational. They can perform lighting design, install receptacles, replace circuit breakers and more. They can also ensure that their buildings meet all safety codes and regulations for the specific industry. This is especially important for companies that operate across multiple locations or buildings in a given area.

It’s essential that you have a team of professionals on hand to handle all of your electrical needs. This way, you can rest assured that your business is operating properly and that it meets all local, state and federal requirements. It’s important to hire a team of experienced electricians who have a proven track record and can get the job done right the first time.

A professional commercial electrician will take the time to understand the unique electrical needs of your company and provide you with a comprehensive estimate. They can also recommend ways to save money on energy costs and make your building more efficient. This will help you to increase productivity and profitability in the long run.

In addition to performing regular electrical maintenance, your professional electrician can also help you upgrade your current system so that it meets your growing needs. Many older buildings were designed to handle 60 to 120 amps and rely on only a few circuits. However, many modern appliances require at least 200 amps to function properly. In addition, if you use tools in your work, you may need more power for the machinery and tools you use.

You can also ask your commercial electrician about audio and visual upgrades for your business. These are a great way to enhance your client’s experience while at your location. It could be anything from calming music for a spa to upbeat tunes for a retail space.

Another thing that you should do to promote your electrical service company is to create a database of all of your past and current clients. This will make it easier for you to contact them when you have a sale or other promotional event.

Industrial

In industrial settings, electrical needs are usually more complex and require more technical skills. An experienced industrial electrician understands the physics behind high voltage equipment used in manufacturing and can help with everything from design to installation. They work with wiring, lighting systems, power distribution networks and controls in manufacturing buildings, warehouses and other large spaces that require specialized equipment to operate.

They often perform routine inspections of electrical systems to detect problems, repair any issues and make recommendations to improve their performance. For example, if you have old wiring that was designed to handle 60 or 120 amps when electricity demand was minimal, it will need to be upgraded to support the modern load. Industrial electrical contractors can also make energy improvements that decrease utility costs, increase efficiency and help reduce environmental impacts.

These technicians are also capable of performing more extensive electrical projects, including new construction and plant relocation. This involves interpreting blueprints, understanding architectural plans and customer requirements for each project and overseeing other workers involved in the building process. Industrial electrical contractors are also responsible for testing and commissioning completed projects, ensuring that all components are working properly and comply with relevant standards.

Electrical upgrades can provide significant savings on utility costs, especially for factories that use a huge amount of energy to run machinery and production lines. Research has shown that for every dollar invested in energy improvements, manufacturers can save three dollars in costs. Storee’s team of industrial electrical services contractors can work with you to upgrade your existing system while minimizing downtime and keeping your facility up and running.

Emergency

If you have unexplained power outages, visibly frayed wires or a break in your panel, you need a licensed electrical contractor immediately. These are all signs that something is not right and can cause serious damage if left untreated. Uneven wiring, faulty appliances or weather damage are common causes of these issues. We can quickly assess the situation and repair any issues to prevent further damage or even fire.

Your home’s electrical system is an essential part of your safety and comfort. When something goes wrong, you need fast, reliable repair services to keep your family safe and your property protected. At WIREONE, we offer 24/7 emergency electrical services for our residential customers. We understand that a problem with your home’s electricity is not something you can wait to address, and we are committed to being there for you when you need us.

We also offer maintenance services for commercial, industrial and residential customers. These can include periodic inspections and testing of your circuits, as well as upgrades to components when necessary. These services can help prevent downtime and data loss, as well as reduce your overall energy costs.

The electrical service in your home includes the pipe (metal or pvc), the meter from the power company, the wires inside that pipe, your electric panel (breakers or fuses) and grounding system. The most common service sizes for homes are 60 amps, 100 amps, and 200 amps. Often times, homeowners need their service upgraded when they sell their house or add new appliances. We can upgrade your service quickly and affordably.

A common electrical emergency is a dead outlet or cord. If an outlet or cord feels hot, gives you an electric shock, or has a burning odor, you should call for emergency services immediately. You should always turn off your home’s power source from the breaker box if you can to avoid additional damage or fires.